Centralized Dust Collector System Installed at Guangdong Qiangqiang Ceramics

Qiangqiang Ceramics Co., Ltd., located in Enping, Guangdong, selected PORVOO to design and install a high-efficiency centralized dust collector system for its polishing and raw material preparation workshops.

廣東恩平強強陶瓷有限公司選擇與PORVOO合作，在拋光車間及配料車間安裝高效中央除塵系統，提升廠內環保管理水平。

Project Overview 項目概況

The factory operates multiple high-speed polishing lines and raw material conveyors, generating significant amounts of fine ceramic dust daily. Previously, local small dust collectors failed to effectively capture fine particles, leading to workshop dust pollution and frequent maintenance.

該廠擁有多條高速拋光線及上料輸送系統，每天產生大量細粉塵。過去使用分散式小型除塵設備，存在細粉捕集效率低、廠區粉塵污染嚴重、清理維護頻繁等問題。

To address these challenges, PORVOO supplied a customized centralized solution, designed to capture dust at multiple points and transport it to a central collection system.

針對此情況，PORVOO設計定製了中央集塵方案，實現全車間多點吸塵，集中排送至中央集塵站。

System Features 系統特點

• High-efficiency cartridge filters with automatic pulse jet cleaning
• Energy-saving centrifugal fans with low noise operation
• Customized suction hoods tailored for polishing lines
• Central pipeline network covering polishing and raw material sections
• Integrated control cabinet with pressure differential monitoring

• 高效濾筒自動脈衝反吹除塵
• 低噪音節能離心風機
• 拋光專用定制吸塵罩
• 全車間封閉吸塵管網覆蓋拋光及配料區域
• 智能電控櫃，壓差監測自動除塵

The centralized system replaces 8 sets of local collectors, reducing maintenance labor, improving air quality, and achieving long-term stable operation.

該中央系統取代了原有8套分散除塵機組，大幅降低人工維護量，提升現場空氣品質，確保穩定長周期運行。

Performance Results 實際效果

Since the system’s implementation, the dust concentration in polishing workshops has dropped by over 80%. The environment is cleaner, machine components are less exposed to dust damage, and employee health conditions have improved significantly.

系統投運後，拋光區域粉塵濃度降低超過80%，車間環境顯著改善，設備使用壽命延長，員工健康狀況明顯好轉。

Energy-efficient fans and intelligent cleaning cycles reduced overall energy consumption by 35%, contributing to Qiangqiang Ceramics’ green manufacturing goals.

節能風機搭配智能反吹除塵，有效節省能耗約35%，助力強強陶瓷實現綠色工廠目標。

Management at Qiangqiang Ceramics highly appreciated PORVOO’s customized design, on-site installation speed, and after-sales service, confirming the system’s excellent cost-performance ratio.

強強陶瓷對PORVOO的定制方案、快速交付及專業售後服務給予高度肯定，認為本次投資兼具環保效益與性價比。

▲ Centralized dust collector system at Qiangqiang Ceramics
▲ 廣東強強陶瓷中央除塵系統現場

📩 Contact Us

Need a dust collection solution for your grinding or polishing lines?
歡迎聯絡 PORVOO 瞭解除塵系統設備應用於磨削產線的完整方案：

Email: porvookjj@qq.com

Facebook: Porvoo Environmental protection technology

WhatsApp: +86 138 2777 8901